Is your Android device Bricked? To unbrick Android and get it running again, follow these instructions. Through this article we will discuss 4 Methods to Unbrick Your Android Phone.
So your phone has been bricked. Your phone won’t boot because you flashed a ROM, installed a mod, modified a system file, or did something else.
Don’t worry about that anymore! Almost definitely, it can be fixed. Unbricking an Android phone is simple. Let’s see the Methods to Unbrick Your Android Phone.
What Does a ‘Bricked Phone’ or ‘Bricking’ Mean?
When you ‘brick’ your phone, it basically implies that your formerly functional device has become useless. A ‘bricked phone’ is one that is unresponsive, won’t turn on, and doesn’t work properly.
Is Your Phone Bricked in Any Way?
The processes for unbricking a phone are determined by how it became bricked in the first place. Bricked phones fall into two categories:
The soft brick : The phone either stops on the Android boot screen, gets trapped in a boot loop, or reboots. It’s soft bricked as long as something happens when you click the power button. The good news is that they are rather simple to repair.
The hard brick : Nothing happens when you press the power button. Issues like attempting to flash an incompatible ROM or kernel might result in hard bricks, and there’s usually no software remedy. Hard bricks are bad news, although they’re quite uncommon.
You’re probably soft bricked, and you’ll see something similar to the image above. While it’s difficult to come up with a universal technique to unbrick Android due to the variances in how different devices work, there are four typical tricks you can try to get back on track:
- Wipe the data before flashing a new ROM.
- Using recovery, disable Xposed modifications.
- Recover data from a Nandroid backup
- Activate the factory image
Make sure your phone and PC are set up and equipped with the necessary tools before you begin.
Want to Unbrick an Android Phone : 4 Methods to Unbrick Your Android Phone.
You can learn Methods to Unbrick Your Android Phone. To Unbrick an Android Phone, You’ll Need Most of the equipment you’ll need to unbrick your phone is likely already in your possession. You should already be aware of how they function because you used them to root your device and flash ROMs. Even so, double-check everything before you start.
The most crucial aspect is a personalized recovery. This was probably installed when you rooted your phone, however it can be overwritten or wiped by the default recovery. If you really need to reinstall it, TWRP is the way to go. It’s a full-featured custom recovery that’s ridiculously simple to use and comes with builds for the majority of popular devices.
Fastboot and ADB may be required next. The Android Developers website has both of them, which are often used for rooting and flashing system tweaks. If you’re not familiar with Fastboot and ADB, see our guide on how to use them.
Finally, some manufacturers flash factory pictures using proprietary software. Hopefully, you won’t need to do this, but if you do, you can use Odin for Samsung, LG Flash Tool for LG devices, or ZTE Unbrick Tool for ZTE devices. Just make sure they work with your individual gadget model.
The majority of these programs will allow you to repair a bricked Android phone using a computer. However, you may frequently complete the task on the phone itself.
1. Re-flash a Custom ROM after wiping data
If you flashed a ROM and now Android won’t boot, try this method.
This is the first one out of 4 Methods to Unbrick Your Android Phone. When installing a fresh custom ROM, one of the most common causes of soft bricking your phone is issues. The fact that you didn’t wipe your data beforehand is usually the culprit.
This is known as a “dirty flash,” and it occurs when you choose to flash a new ROM on top of your old one instead of having to restore your apps and data. You can usually get away with it if you’re flashing a newer version of your existing ROM, but you must always delete your data before flashing a different ROM.
Fortunately, it’s a simple fix—-as long as you’ve properly backed up your phone. If you haven’t, you’ve already learned a valuable lesson the hard way. Take the following steps:
- Enter your chosen recovery mode.
- Select Advanced Wipe from the Wipe drop-down menu.
- Check the Data box, then hit Confirm (you may also delete the system, ART cache, and cache again).
- Re-flash your custom ROM if necessary.
Although wiping your data effectively conducts a factory reset, it should not delete your internal storage or SD card (although, again, you should back it up just to be safe). The Android setup screen will appear when you restart your phone. Your apps should start reinstalling automatically when you enter your Google account credentials.
You can recover your data from your Nandroid backup if necessary. See the section below on restoring a Nandroid backup.
2. In Recovery, disable Xposed Modules.
If you encounter boot loops after installing a new Xposed module, try this method.
The Xposed Framework isn’t as popular as it once was, but it’s still an easy and hazardous way to modify your phone. So, this is the second one out of 4 Methods to Unbrick Your Android Phone.
The greatest Xposed modules are so simple to install—many are available in the Play Store—that they fool you into thinking you’re safe. Even though they can brick your smartphone, it’s unusual that anyone makes a Nandroid backup before downloading a new Xposed module.
Install the Xposed Uninstaller with ADB Push.
If the Xposed Uninstaller is available for your Android version, it’s the best solution to solve these issues. This is a simple flashable ZIP that you may use to delete Xposed from your device using the recovery mode.
If you don’t already have it on your phone, you can save it to an SD card or use the ADB push method to copy it over:
- Xposed Uninstaller can be downloaded to your desktop.
- Connect your phone via USB to your computer and enter recovery mode.
- To change the directory where adb is installed, use the command prompt (Windows) or Terminal (Mac) and use the cd command.
- Type adb push [full path to xposed uninstaller.zip] [destination full path]. On Mac and Linux, start the command with./ (for example,./adb).
- After the file has completed copying, run it through the recovery.
In Recovery, How to Disable Xposed Modules
If ADB push and the Xposed Uninstaller aren’t working, try one of these options.
You may disable Xposed through recovery with this method:
- Boot into recovery, then navigate to Advanced > Terminal command.
- Create a file called /data/data/de.robv.android.xposed.installer/conf/disabled
- Reboot your phone.
This method prevents Xposed modules from starting:
- Boot into recovery and Then you can select File Manager.
- Navigate to the folder /data/data/de.robv.android.xposed.installer/conf/ then you can delete the file modules.list
- Reboot your phone.
None of these solutions will undo any changes the modules have made to your system. If these changes caused your phone to brick, you will have to restore your Nandroid backup.
3. Nandroid Backup Restore Method
Try this method if: You need to remove other system mods, replace a tweaked system file, or if the methods above didn’t work.
For Android mods and customizations, the Nandroid backup offers a safety net. It’s a complete snapshot of your phone, including the operating system as well as your data and apps. You’ll be able to restore your soft bricked device as long as you have access to your custom recovery and a Nandroid backup. So, this is the good one out of 4 Methods to Unbrick Your Android Phone.
To do so:
- Enter recovery mode and select Restore.
- Choose your backup from the list, confirm your selection, and wait for it to be restored.
- Restart your device.
Making Nandroid backups is a bit of a pain. They are time-consuming and cannot be completed in the background. They’re worth it, though, because they’re the quickest way to unbrick your phone.
Data from a Nandroid Backup Can Be Recovered
If you have to erase your data and didn’t back it up in a readily recoverable format, a Nandroid backup can save the day. Specific components of a Nandroid can be extracted, allowing you to restore your apps and data without having to reinstall the operating system.
The instructions are as follows:
- Install Titanium Backup from the Play Store after booting into Android. Even though this software hasn’t been updated in a while, it’s still one of the best for this job.
- Select Special Backup/Restore > Extract from Nandroid Backup from the navigation bar.
- Choose a backup from the list.
- Select whether you want to restore apps, data, or both (or hit Select All).
- To begin the restoration procedure, tap the green tick icon.
4. Method of Flash a Factory Image
If the approaches above didn’t work, try this method.
If all other methods of unbricking Android have failed, the last resort is to re-flash a factory image. This returns your phone to its previous condition and wipes all of your data, including internal storage. Your phone will also be unrooted.
You might want to try flashing a stock ROM first because it removes everything. Instead of factory images, OnePlus provides flashable ROMs for recovery, and xda-developers.com has comparable for almost every device. For added convenience, you’ll be able to flash a pre-rooted stock ROM in many circumstances.
Flashing a factory image varies from flashing a ROM in that it is done using a desktop computer connection rather than recovery. Some devices use the Android SDK’s Fastboot utility, while others use bespoke software. Samsung, for example, utilizes the Odin tool.
The directions for flashing a factory image change for each device due to the various techniques employed. And because not all manufacturers make their firmware publicly available, you’ll have to look for it elsewhere.
This is the last one out of 4 Methods to Unbrick Your Android Phone.
Here are some resources for finding factory images for popular Android brands:
- Google Pixel
- Samsung
- Motorola
- OnePlus
- Sony
What Are Hard Bricks Made Of?
Hard bricked phones are notoriously tough to repair, but they’re mercifully uncommon.
How to Unbrick an Android Phone That Has Been Hard Bricked
To begin, make sure the phone is truly bricked by plugging it in and leaving it to charge for a time. Hold the power button down for 10-15 seconds (or remove the battery if you have an older device) to try to reset it. You should also try plugging it into your computer; if your phone is not identified by your computer, it is likely hard bricked.
If it’s clearly hard bricked, you might be out of luck. A USB Jig, a little gadget that fits into the USB port and puts the phone into Download Mode to reload the default software, can resurrect a few phones.
On eBay, USB Jigs for hard bricked phones are available for a low price, but only for a limited number of ancient smartphones. There’s no assurance they’ll work even then.
After that, you’ll either need to send your phone in for repair (though rooted it may have void your warranty) or find a local phone repair specialist. However, you will almost certainly need to purchase a new device.
Safely Modify Android
This guide should have helped you unbrick your Android phone by using 4 Methods to Unbrick Your Android Phone. And hopefully, your Android rooting and hacking experience hasn’t put you off completely.
You may still have a great time with your smartphone if you want to be secure in the future. Hope this article is helpful for you to try out the Methods to Unbrick Your Android Phone.
For some great ideas, check out our guide to the top Android things that help without rooting.
Need to know more , click below links and get the knowledge:
Unlocking the bootloader is an important aspect of the Android modification process. Let’s see How.
If you’re not sure about how to install a custom ROM on Android. Click Here.
If you need to know more about the Run Linux on Your Android Devices. Read here.
Do you need to find the Difference between GSI on Android and a Custom Rom? Find Here.
Do you need to know about the most popular Android ROM : LineageOS. Click Here.
Worry about How to Set Up and Use ADB Wirelessly With Android. Find here.
Wanna know about CopperheadOS: The Secure, Private, Google-Free Android ROM. Read Here.
Editor’s choice:
